1. Winter decoration SPC floor to prevent cracking
In the process of winter decoration construction, SPC floors need to be placed for more than 24 hours after being transported from outdoor to indoor. It can only be laid after adapting to the indoor temperature to avoid hollowing and falling off after construction. In addition, the cold proof shed on the wall in winter is mainly caused by uneven water loss. Pasting kraft paper or bean cloth on the wall can play a preventive role.
2. Temperature control in winter decoration
Due to the relatively low temperature in winter, plastering, putty, tiling and other construction is easy to freeze the working face, resulting in hollowing and other problems. If the decoration room has been heated, the temperature is conducive to the construction, but we should also pay attention to the weather cracking caused by the rapid water loss of the working face.
3. There is a gap in winter decoration
We all know the principle of heat expansion and cold contraction, so when decorating in winter, we need to pay attention to leave appropriate gaps. When laying SPC floor, an expansion joint of about 2 mm should be left around each floor, otherwise it will cause expansion and suspension in summer.
1. SPC lock floor without wax maintenance, wear resistance, pollution resistance, environmental protection, sound insulation, noise reduction, impact resistance, is the best floor in school and office.
2. It is made of PVC (polyvinyl chloride resin) plus stone powder, additives, etc. after high temperature calendering and surface wear-resistant layer production. It can not contain formaldehyde and other harmful substances. It is 100% formaldehyde free environmental protection floor.
3. SPC lock floor has composite floor, the surface has wear-resistant layer, for example, you choose in school, the floor cleaning can’t have professional personnel like hospital and shopping mall, so we must choose to use composite SPC lock floor, wear resistance is good, just suitable for school use.
4. For another example, due to the active school students, frequent movement of tables, chairs and benches, and the impact of multiple floors, it is required that the wear resistance of the floor should be high, the wear resistance should be good, and it is easy to clean and maintain. For the odorless floor, the color should be rich SPC lock lock floor. It is suggested that the size of stone plastic floor should be about 150 * 1220 mm or 180 * 1220 mm, and the thickness of wear-resistant layer should be more than 0.4 mm; The floor thickness should be 2.5-3.0 mm.