It is believed that many newly renovated users have encountered melancholic problems after installing the floor, the floor is creaking, what is the reason? It depends on what kind of noise it makes. Laminate flooring is generally composed of four layers of materials, namely wear-resistant layer, decorative layer, high-density base material layer, and balance (moisture-proof) layer. Laminate flooring is also called impregnated paper laminated wood flooring and laminate flooring. Qualified laminate flooring is impregnated with one or more layers of special thermosetting amino resin. Wood flooring is made of wood. The wood flooring produced in China is mainly divided into six categories: solid wood flooring, laminate flooring, solid wood composite flooring, multilayer composite flooring, bamboo flooring and cork flooring, as well as the emerging wood-plastic flooring. Solid wood flooring is a floor decoration material formed by drying and processing natural wood. Also known as log floor, it is a floor made directly from solid wood. It has the texture of natural wood growth and is a poor conductor of heat. It can play the role of warming in winter and cooling in summer. It has the characteristics of comfortable feet and safe use. It is an ideal material for floor decoration such as bedrooms, living rooms, and studies. If a place is stepped on, and then stepped on it, it must be caused by the keel tension between the wooden floor and the ground tenon, which must be caused by the wooden floor and the ground tenon unchanged and pulled up by the keel of.
So how to make the new floor squeaky solid wood floor squeaky? If a place is stepped on occasionally, there will be noise, and occasionally it will not, so the situation is mostly that the floor nails are smaller than the solid wood floor drilling, and there is a loose gap between the floors. After half of the people are decorated, the floor will be more or more when walking. There is less noise, but O only differs in position. There are few ways to deal with the sound of the floor, and even if the ease of the problem is dealt with, it is impossible to completely cure the roof. The purpose is to fundamentally cure every thought, tighten the keel from the beginning, and rebuild the floor. This is indeed a labor-intensive headache, and no one wants to go back to work and rebuild. Only before assembling the keel and the floor, pay attention to the following process and steps, the floor will not appear loops. The use of the floor is also very important, it is necessary to strengthen the floor brand. There is also the issue of assembly time. Before the keel is assembled, a 12mm electric hammer is generally used to drill the hole. It would be better if the tenon dries and compacts within a few days, and then gently put it down. When drilling a solid wood floor, the diameter of the hole must be smaller than the nails so that the floor can eat nails; the wall area is reserved for floor shrinkage joints of more than 1 cm to prevent weather changes or the water content of the floor does not match the expansion arch. This is what many people do. knew. Ouch. These are some small skills, first of all, we must pay attention to details, which is also an important factor to ensure the quality of the floor. for reference.